how big of a pain in the *** is this?
07-02-2014, 04:36 PM
#1
Member
Thread Starter
Join Date: Nov 2013
Location: Indiana
Posts: 211
Likes: 0
Received 1 Like
on
1 Post
Year: 1999 Sport Road Rash Monstaliner
Model: Cherokee
Engine: 4.0L I6 Power Tech Engine
how big of a pain in the *** is this?
replacing rear lower quarter panel due to rust. The area I'm specifically referring to is right behind the rear wheel wells and under the plastic bumper end caps. I don't have a welder but would find someone who does. Is it a pain to fix?
07-04-2014, 09:44 AM
#2
Newbie
Join Date: Mar 2011
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
IMO, don't go through the hassle of fixing the rust. Get yourself an angle grinder or sawzall, rivet gun, and some seam sealer and do a cut and fold. Figure on spending most of a day to get it done. Good upgrade to do and you're eliminating some clearance issues. I went this route and am happy I did it.
http://www.jeepforum.com/forum/f11/c...t-way-1007865/
http://www.jeepforum.com/forum/f11/c...t-way-1007865/
07-06-2014, 05:29 PM
#3
Member
Thread Starter
Join Date: Nov 2013
Location: Indiana
Posts: 211
Likes: 0
Received 1 Like
on
1 Post
Year: 1999 Sport Road Rash Monstaliner
Model: Cherokee
Engine: 4.0L I6 Power Tech Engine
IMO, don't go through the hassle of fixing the rust. Get yourself an angle grinder or sawzall, rivet gun, and some seam sealer and do a cut and fold. Figure on spending most of a day to get it done. Good upgrade to do and you're eliminating some clearance issues. I went this route and am happy I did it.
http://www.jeepforum.com/forum/f11/c...t-way-1007865/
http://www.jeepforum.com/forum/f11/c...t-way-1007865/
I don't have an aftermarket bumper though so that gap would look rather funky without doing something in the space.
Thread
Thread Starter
Forum
Replies
Last Post
SergeK
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
02-27-2023 03:38 PM
LittleRed94
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
10-06-2015 08:09 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)