home made engine harness
Thread Starter
Newbie
Joined: Dec 2009
Posts: 5
Likes: 0
Model: Cherokee
Stand alone engine harness:
I Am new here but have been on pirate 4x4 for awhile. I need help finding some kinda diagram for a stand alone engine harness. I have been through about 300 websites and have not found a single thread or picture.
88 XJ
4.0
AW4
AMC231 T-case
Please help!!!!!
sorry I just really need some help. I have read the fsm front back again and again. also the renix manual and cat figure out how to make it work..
basically the harness caught fire and the only one I could find to fit my cheap budget is out of a 93. Most sensors are the same some are not. So Iwould like to go ahead and built a clean/neat stand alone harness. I have read the FSM and the renix F.I. maual and I am still lost on a few things Like how do the relays tie into the harness.
88 XJ
4.0
AW4
AMC231 T-case
Please help!!!!!
sorry I just really need some help. I have read the fsm front back again and again. also the renix manual and cat figure out how to make it work..
basically the harness caught fire and the only one I could find to fit my cheap budget is out of a 93. Most sensors are the same some are not. So Iwould like to go ahead and built a clean/neat stand alone harness. I have read the FSM and the renix F.I. maual and I am still lost on a few things Like how do the relays tie into the harness.
Last edited by COSXJFAN; Dec 31, 2009 at 06:51 PM. Reason: redundant
Senior Member
Joined: Apr 2009
Posts: 922
Likes: 2
From: Grand Haven, Michigan
Year: 1998, 1999
Model: Cherokee
Engine: 4.0
My vote is keep looking in JY's. Should be cheaper and easier in the long run. Have them do a search for you...
Did you find and fix the root cause that lead to the melt down? Otherwise the new one may do the same...
Did you find and fix the root cause that lead to the melt down? Otherwise the new one may do the same...
Do you hear banjos?
Joined: Apr 2008
Posts: 9,644
Likes: 6
Model: Cherokee
mcluvin2k5, I merged all of this into one post, since that is all that is required. Please do not flood the board with the same question, it does not make a good impression. Thanks much, and good luck with your questions.
Kyle
Kyle
Thread Starter
Newbie
Joined: Dec 2009
Posts: 5
Likes: 0
Model: Cherokee
sorry guys like I said I have been to every Cherokee forum on here and no answer at all. so If any one knows of any thread or diagram that deals with stand alone engine harness it would be very helpful. I really need to do this As soon as possible.
sorry for the multi-posting
sorry for the multi-posting
Thread Starter
Newbie
Joined: Dec 2009
Posts: 5
Likes: 0
Model: Cherokee
The root of the problem was the head light switch. I have bought a harness out of a Junk yard and everything runs fine now. I really just need a good schematic or diagram on the relays. One like the renix F.I. manual but a little more detailed. Any one know where I can find one.
I have a new harness and ECU and I am taking measurements and am going to start cutting tomorrow. There is a lot of wire and I just thought I could shorten it all up and make it more simple for later.
I have a new harness and ECU and I am taking measurements and am going to start cutting tomorrow. There is a lot of wire and I just thought I could shorten it all up and make it more simple for later.
Thread
Thread Starter
Forum
Replies
Last Post
Blackcherokee290
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
28
Jan 8, 2025 11:36 PM
David Chauncey Clothier
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
Aug 29, 2015 09:31 PM
clark40
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
Aug 28, 2015 07:11 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)