1sttimexjer

hello all. the drivers side high beam on my 99 xj wont work. changed the bulb and tested the power at the connection and it was fine. fuse maybe? which fuse is it if so?

also...what fuse is the A/C unit? it didnt work, had it fixed and charged and just randomly stopped working again so i think its the fuse.

any input would be a great help

VTJeep

They headlight fuse is down by pass. feet. The ac fuse is pass. side under hood. Reference your owners manual for specifics on fuse locations and amperage... Then again, you said you had power at the bulb end? If that's the case then possibly there is a bad connection in the wiring, or a bad headlight switch?

1sttimexjer

i dont have an owners manual. i looked online and found like 3 different charts

VTJeep

99 xj sport? 4dr w/ aw4 and np242? If so I'll go grab my manual... In all honesty its probably the same even if you've got a classic, or se... Jeep used pretty generic wiring harnesses, etc...

1sttimexjer

its the 241. should be the same though

VTJeep

Brb...
Ok, the ac fuse is labeled on the box cover. The headlight fuses are as follows:
L high beam: #3, 10A.
R high beam: #16, 10A.

1sttimexjer

thanks man i appreciate it. ill look at it in the a.m. considering its dark. lol