bmrrwolfe

I got a 48" Hi-lift jack, and need a good place to mount it, I have a surco rack, but am kinda concerned to mounted on the exterior side because of its high weight, i know i could mount it inside, but i keep my spare up there. i think it would look cool mounted the bumper front, or rear with a little modification?
Anyone have some pictures of them mounted?
Thanks!

claygrassmann

https://www.cherokeeforum.com/showth...ht=baja+lights

thats mine with the jack on the hood

BLKXJ 96

I had mine mounted on a Surco rack for a while, the issue I had was the jack sat out in the weather and all the moving parts would rust. Then when you need to use the jack it was worthless.
Having that jack mounted to the outside of that Surco rack and bouncing around tore that screw together flimsey rack apart, to the point where I had to run longer machine screws through sides of the tube to hold it together.
The rack will hold the weight, but I would not recommend leaving it up there all the time. I had mine mounted for about three years, Now I just toss it in the back and tie it down when I wheel.

COSXJFAN

I have mine on the hood as well:





HTH!!

a1racer

man that thing looks good and the paint blend's with the dirt. it is dirt camo what is it the desert brown or tan

99XJDad

I was considering mounting mine there but was wondering how it affects visibility.

COSXJFAN

There are times when it seems to be in the way, but for the the most part, I like it there. As far as the weather, I just keep it lubed up, and haven't had any troubles with it.

And Racer, it is tan, with a little dirt splashed on for color!! LOL!!

(t)exjay

Here's mine on the front bumper:

xjjeepthing

I have a Surco and my Hi-lift mounted to it. Been that way for almost 3 years with no issues. I have a Hi-lift jack cover and used Hi-lift's 4xRac mounts. I take the jack and spray the Mechanism with WD40 every fall and put it back in The bag and mount back on the Surco.
http://www.hi-lift.com/accessories/4xrac.html
http://www.hi-lift.com/accessories/jack-protector.html

caged

mine is mounted to my rack and has been for over 5 years, and it's been outside for the last 2 winters.
i just spray it in the spring and fall and it still works great.

clayton3854

im looking to get a hi-lift jack with in the next couple of weeks and mount it to my hood. 1 questions what do you use to spray it down so it stil works dw40? and what hardware would i need to get to mount it to my hood

claygrassmann

i just use wd40 as far as mounting it i used some all thread and fender washers and lock nuts

clayton3854

aight thanks man. i like your set up so ill prolly do it close to that way. just need to get my lift on this week get the allignment then save for the jack

bmrrwolfe

I really like the hood, and the front bumper mounting, very different and it makes the front end look real mean!
I think im going to look at the front bumper and get some pictures after i get the mounting kit tomorrow

(t)exjay

I appreciate the compliment!

This is the kit I used to mount it to the front bumper: http://www.quadratec.com/products/92200_04.htm

It was an easy install after taking the bumper off. However, be sure to account for the curvature of the front bumper when installing the mounts. You're going to need to bend the mounting brackets a little in order for them to line up with the Hi-Lift properly. I didn't do that and after bolting them down had to use a 3 lb. persuader to bang them into the appropriate place.