Help to ID cable
05-25-2019, 03:39 PM
#1
Junior Member
Thread Starter
Help to ID cable
1989 Renix XJ. Engine is stock 4.0. AW4 with 231 transfer case. All those items are stock. Was performing Cruiser54 tips 1-5 and discovered this unplugged in the bundle above the oil filter moving back to the firewall. Tried tracing it with no luck.
Single wire connector that is black. Any ideas what it goes to?
Thanks in advance.
05-25-2019, 04:26 PM
#2
CF Veteran
Join Date: Dec 2017
Posts: 3,897
Received 1,067 Likes
on
857 Posts
Year: 1989
Model: Comanche (MJ)
Engine: 4.0
Connector for an underhood light I think. I had one that looked like that as well. As I recall it went forward in the wiring harness and spliced into power somewhere around the coil wiring. I removed it when I was adding the ground at the blower motor.
05-25-2019, 05:59 PM
#3
Junior Member
Thread Starter
My hood light is connected and working. Thanks for the idea though.
Thread
Thread Starter
Forum
Replies
Last Post
rangermonroe
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
5
07-25-2017 04:00 PM
mike96xj
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
09-13-2013 03:18 PM
dogkatcher
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
03-09-2013 08:14 PM
90creeper
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
03-05-2012 03:28 PM
DaveVmax
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
11
01-23-2012 06:37 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)