Help: Door Lock Cylinders 89XJ 2 Door
#1
Member
Thread Starter
Help: Door Lock Cylinders 89XJ 2 Door
Hoping that someone can help with this....
I need new door lock cylinders for my 89 Jeep Cherokee, 2 door, with power locks and windows (and mirrors). Some ***** toasted my drivers door look by jamming a big screwdriver into it. I ordered a new set of lock cylinders on line but they were not the right ones. I went to my local Lordco parts guy and all his catalogues show the same wrong cylinder sets (seems to be a theme).
I went online again and found what I think are the right ones (http://teamcherokee.com/door-lock-cy...ler-1981-1990/)
but the trim ring isn't black like the originals. Anyone know where I can find a set of black trip ringed door cylinders that are the correct fit? Thanks for any advice.
PS: I supposed that I could just buy one lock cylinder and have it keyed to the existing key if that's possible. Any suggestions there?
I need new door lock cylinders for my 89 Jeep Cherokee, 2 door, with power locks and windows (and mirrors). Some ***** toasted my drivers door look by jamming a big screwdriver into it. I ordered a new set of lock cylinders on line but they were not the right ones. I went to my local Lordco parts guy and all his catalogues show the same wrong cylinder sets (seems to be a theme).
I went online again and found what I think are the right ones (http://teamcherokee.com/door-lock-cy...ler-1981-1990/)
but the trim ring isn't black like the originals. Anyone know where I can find a set of black trip ringed door cylinders that are the correct fit? Thanks for any advice.
PS: I supposed that I could just buy one lock cylinder and have it keyed to the existing key if that's possible. Any suggestions there?
Last edited by Bucko; 11-14-2015 at 07:56 PM.
#2
Member
Thread Starter
I found the OEM black cylinder online at 'factory chrysler parts' for $26 for one cylinder and $40 shipping. Ouch!
#3
CF Veteran
Join Date: Mar 2010
Location: Broward County Fl.
Posts: 47,923
Likes: 0
Received 22 Likes
on
22 Posts
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
Just remove your black trim ring and use on new lock. I got chrome on mine dont look bad or just paint it b4 install...Those moper ones are uncoded also...so theres more expense at lock smith.
#4
Member
Thread Starter
At this point, I going to try and buy one from the dealer and swap in the pins from the old lock - although they may be shot - I'm waiting to get a new lock in had before I cannibalize the old one - not really sure why I'm waiting since it's completely shot. . If the pins are shot, it's pretty easy to grind/cut uncoded pins to make them work (I think).
Thread
Thread Starter
Forum
Replies
Last Post
Niccolo Ramirez
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
10-23-2015 09:35 AM
DragonHawk015
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
10-19-2015 08:00 AM
Niccolo Ramirez
Modified XJ Cherokee Tech
0
10-19-2015 01:16 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)