Help! Cut wires in engine bay
#1
Junior Member
Thread Starter
Join Date: Apr 2016
Location: Helena MT
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0L I6
Help! Cut wires in engine bay
Got several cut wires that come down on the passenger side of the engine up against the fire wall. No clue what they're for. Maybe for ABS or Cruise Control? Seeing as how I don't have those maybe the PO just snipped those. Really would appreciate being able to identify these wires!
Cut wires from where the bulk of the wires come down by the dipstick.
Close up of cut wires.
Cut wires from where the bulk of the wires come down by the dipstick.
Close up of cut wires.
#2
Banned
Join Date: Oct 2016
Posts: 1,553
Likes: 0
Received 4 Likes
on
4 Posts
Year: 2000 and 1998
Model: Cherokee
Engine: 4.0
??, whats the truck condition. run?. drive?. shift?. lights work?.
can you look under to see where they go? what kind of jeep is it?. what year?
anything that just dont work?
can you look under to see where they go? what kind of jeep is it?. what year?
anything that just dont work?
#3
Junior Member
Thread Starter
Join Date: Apr 2016
Location: Helena MT
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0L I6
Runs, and drives fine, shifts fine as well, (manual) but my reverse lights don't work and neither does my speedo/odometer, They go into the main wiring harness in the engine bay. Thinking they're for a automatic trans but unsure. And it's a 1993 jeep cherokee sport, 4.0l ax15 trans
#4
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,867
Received 1,524 Likes
on
1,236 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Runs, and drives fine, shifts fine as well, (manual) but my reverse lights don't work and neither does my speedo/odometer, They go into the main wiring harness in the engine bay. Thinking they're for a automatic trans but unsure. And it's a 1993 jeep cherokee sport, 4.0l ax15 trans
#5
Junior Member
Thread Starter
Join Date: Apr 2016
Location: Helena MT
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0L I6
Pretty sure it came from the factory as a manual. I did however find what one of the cut wires goes to. (White with pink tracer, thought that'd be the easiest to find in the wiring diagram, it was.) The white with pink tracer wire goes to the brake switch on the pedal from the TCU. And seeing as how I don't have a automatic trans, I don't have a TCU. So not worried about that wire, not sure about the others but thinking they'd go there as well.