Jeep Cherokee Forum

Jeep Cherokee Forum (https://www.cherokeeforum.com/)
-   Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here (https://www.cherokeeforum.com/f2/)
-   -   Help..Clutch (https://www.cherokeeforum.com/f2/help-clutch-139619/)

gregspappy 06-20-2012 08:44 AM

Help..Clutch
 
Hi..having probs with clutch...engine off gears fine....when stopped @ red light it dont want to go in first sometimes or its in first with clutch pedal depressed all the way and I have to keep my foot on brake as it wants to go and it starts to bog down like I'm letting pedal out and when trying to put in reverse it grinds till it winds down to be able to go in. Checked fluid..looks full just nasty looking..almost a black color.. Just need a little help and maybe point me in a direction...Tks

TheJerm 06-20-2012 09:16 AM

Does pumping the clutch help?

Gee oh Dee 06-20-2012 09:26 AM

Sounds like the clutch isn't fully disengaging.

gregspappy 06-20-2012 09:50 AM

yes...have to do it a few times... then it will go in....the guy I bought it from said it's a " hydraulic" clutch

TheJerm 06-20-2012 09:53 AM

Sounds like you need a new hydraulic system, they cant be bleed like normal system and come as a sealed unit

tkeehn 06-20-2012 10:47 AM

Clutch
 
Hey I have the same issue. I Just replaced my clutch last night like an idiot I didn't pay enough attention to the linkages..anyways...It still grinds into reverse. I need to conect the transfer case the right way tonight. I am assuming its either a bad clutch system on mine or had a friend mention it could be syncros. Also not sure if its a rubber hose but they can get fatigued over time I am told.

pat_tm 06-20-2012 11:08 AM

Some hydro clutch systems can be bled. Double check. could just be a bad slave cyl

TheJerm 06-20-2012 12:47 PM

OP is a 94 so external slave and not bleed-able. Older internal slaves are bleed-able.

I was able to bleed the new system but it wasnt fun


All times are GMT -5. The time now is 03:55 PM.


© 2024 MH Sub I, LLC dba Internet Brands