Hey guys. New here on the site...glad I found it. I'm having to remove and replace the harmonic balancer on my '99 Jeep Cherokee. From the information that I've found via internet...there should be some bolts that are around the large bolt in the middle. But there are none on mine...just the large one in the middle. Is this what I should be seeing...or should they be there. I've got the pulley removal tool, any suggestions and or help would be greatly appreciated.

 

nope, just the one big bolt in the center. take your time and be aware of the key-way. if you're not replacing the seal be careful installing the new HB

 

No, there aren't any bolts other than the center one. The bolt holes there are for the puller. Be sure you only pull/push on the inner portion of the HB. Pulling the old one off won't really matter, but don't push it on using the outside edge.

 

Thanks guys for the quick responses. Just finished putting the HB on and re installing the belt. Running good as new!! Thanks