hardwiring Stock headlights
#1
Newbie
Thread Starter
Join Date: Dec 2015
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
hardwiring Stock headlights
Ok so Ive owned my jeep for a few months with no headlights working ( I bought little lights to us ) but a while ago i was told to check everything fuses, grounds, the switch, wires and so on but I was also told that hardwiring the headlights isnt bad at all so I was wondering what I need to power to and best way to run it or even if theres a write up, any help would help so much
#2
Beach Bum
#4
Newbie
Thread Starter
Join Date: Dec 2015
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
#5
Senior Member
Join Date: Sep 2014
Location: A.A. Co. Maryland
Posts: 738
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1995
Model: Cherokee
Engine: 4.0 Inline
on my '95 there is a plug that goes to the front end lights that sits under the air cleaner box it is known weak spot and can get very corroded, I don't know when or if they ever deleted it. If you have one try cleaning and refreshing the connections then use a voltmeter to make sure that you are getting voltage at the bulb socket.
#6
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,875
Received 1,526 Likes
on
1,238 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
on my '95 there is a plug that goes to the front end lights that sits under the air cleaner box it is known weak spot and can get very corroded, I don't know when or if they ever deleted it. If you have one try cleaning and refreshing the connections then use a voltmeter to make sure that you are getting voltage at the bulb socket.
Thread
Thread Starter
Forum
Replies
Last Post
firefighter92345
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
02-07-2016 06:26 AM
n_fanelli
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
13
02-06-2016 11:34 AM
Steinnez
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
02-01-2016 03:04 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)