This thread is to post any bolts thread, length, pitch that everyone comes by so if bolts are miss placed in tare downs can be found here. thanks for everyone who posts I've been coming across a lot of threads from this forum and others with this problem this tread should help

 

So in my 1989 jeep Cherokee with a straight 6 4.0l the exhaust and intake manifold is 3/8-16 with 1" length bolts the studs are 3/8-16 on the side that goes into the head and 3/8-24 coming out and it's the same with the top bolts on the bell housing that bolts to the back of the engine are also 3/8-16 with 1"length and the small bolts for the alternator brackets with the smaller holes on both sides are also 3/8-16 with 1/2"lengths

 

www.kelleyswip.com/tech.html, follow the links. www.kelleyswip.com/screws.html is the specific page.

Contributions are always welcome!