goin' doorless question
#1
Member
Thread Starter
Join Date: Oct 2008
Location: New Hampshire
Posts: 181
Likes: 0
Received 1 Like
on
1 Post
Year: 1994
Model: Cherokee
Engine: 4.0
goin' doorless question
Here are my hinges....
pass side
Drivers side
I noticed the driver side is different then the pass. Can I still go doorless with this style hinge?
Here my XJ, going to do the bed liner on the bottom soon, and 31's when these wear down
pass side
Drivers side
I noticed the driver side is different then the pass. Can I still go doorless with this style hinge?
Here my XJ, going to do the bed liner on the bottom soon, and 31's when these wear down
#2
looks like it was wrecked at one point and some body shop somewhere welded on a late model hinge, but ya you should still be able to run doorless just use the search on here and look for a write up.
#3
Seasoned Member
Join Date: Dec 2008
Location: Chattanooga, TN
Posts: 443
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
Id just unbolt the hinges at the body (not where they bolt to the door). Its what im gonna do on mine. Seems easier than doing all that pin cutting crap
#5
Senior Member
Join Date: Apr 2009
Posts: 501
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L I-6
I dunno, I'd rather have the door slide on and off, eventually I want to build some half doors and it would be nice to be able to swap them without an tools.
Thread
Thread Starter
Forum
Replies
Last Post
codykrr
Modified XJ Cherokee Tech
9
09-18-2015 01:27 PM
mach3lude
Modified XJ Cherokee Tech
17
09-10-2015 02:34 PM
Mmll52
Modified XJ Cherokee Tech
6
09-02-2015 10:01 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)