99 xj discarded heater core
10-02-2018, 11:35 AM
#1
Newbie
Thread Starter
Join Date: Sep 2011
Location: Michigan
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
99 xj discarded heater core
I'm looking to find an old discarded XJ heater core for my 1999 Xj. I may have a custom brass one made for Michigan winters and I need a sample. Anyone know where I can find one? Or even better see the attached PDF for Part #: 399233 the last copper/ brass one made by Thermal Solutions Manufacturing.
Last edited by jstone; 10-04-2018 at 04:16 PM. Reason: More Info
10-02-2018, 12:02 PM
#2
Seasoned Member
Junk yard if it isn't any good they might only charge scrap price, if you get it before they scrap it.
10-02-2018, 12:09 PM
#3
CF Veteran
Join Date: Dec 2015
Location: PA
Posts: 3,038
Likes: 0
Received 333 Likes
on
277 Posts
Year: 1997
Model: Cherokee
Engine: 4.0L
I wouldnt trust an old heater core of unknown condition from a parts yard, even if it appears to be ok. Could have a pinhole. Unless youre going to test it at the yard, just buy a new one. I would imagine its cheaper than having one custom made.
10-02-2018, 12:27 PM
#4
CF Veteran
Join Date: Nov 2017
Location: Groton, MA
Posts: 3,695
Received 234 Likes
on
207 Posts
Year: 1995
Model: Cherokee(XJ)
Engine: I6 4.0L
It wouldn't matter if it has a pinhole if he's just using it for a model. However, I definitely agree that a custom one seems like extreme overkill - a new OEM style from a reputable manufacturer should last the rest of the life of the vehicle and won't cost a fortune.
10-02-2018, 05:00 PM
#7
Newbie
Thread Starter
Join Date: Sep 2011
Location: Michigan
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
99 xj discarded heater core
The reason behind having one made is that none of the newer aluminum ones are trustworthy; I've read story after story of people who have spent 8-10 hours taking out the dash only to find the new aluminum (China made) core sprang a leak in less than a year. A company called Brassworks was quoted to make one for about $300 which is probably similar to the dealer's Mopar price(if they still sold them). A company called Thermal Solutions Manufacturing was the last to make an actual Brass/Copper core-see attached. I need an old core for "the mold".
Trending Topics
10-02-2018, 05:18 PM
#8
CF Veteran
Join Date: Oct 2015
Posts: 7,357
Likes: 0
Received 1,530 Likes
on
1,173 Posts
Year: 2000
Model: Cherokee (XJ)
Not to derail this thread.
But under certain circumstances radiators can be fixed. I have been meaning to go to a radiator shop and see if the same can be done with a heater core and/or an evap core.
Basically they are radiators right?
But under certain circumstances radiators can be fixed. I have been meaning to go to a radiator shop and see if the same can be done with a heater core and/or an evap core.
Basically they are radiators right?
10-02-2018, 06:06 PM
#9
Seasoned Member
yes they can
I used to repair radiators for a semi body shop I worked for and rads for semi's were the only ones we repaired since they could cost thousands to replace, if it were a car we just recommended a new one if one spot rots there are going to be more.
10-02-2018, 08:29 PM
#11
Seasoned Member
They do and they run around $65 and up
The unit is sold under the name Vista Pro, part #399233
http://www.thermalsolutionsmfg.com/a...parts-catalog/
The unit is sold under the name Vista Pro, part #399233
http://www.thermalsolutionsmfg.com/a...parts-catalog/
Last edited by papablista; 10-02-2018 at 08:31 PM.
10-03-2018, 07:49 AM
#13
Senior Member
Join Date: Nov 2016
Location: Homer Georgia
Posts: 699
Received 96 Likes
on
87 Posts
Year: 2000
Model: Cherokee
Engine: 4.0l
I may still have my old one but its from a 2000. It was not leaking when I replaced it while fixing all my AC leaks. You can have it for cost of shipping to you. I just got to find it.
Last edited by country2; 10-03-2018 at 07:54 AM.
10-03-2018, 08:45 AM
#14
CF Veteran
Join Date: Oct 2013
Location: Tarpon Springs, FL / Denver, CO
Posts: 2,097
Likes: 0
Received 8 Likes
on
7 Posts
Year: '98
Engine: 4.0 I6
The reason behind having one made is that none of the newer aluminum ones are trustworthy; I've read story after story of people who have spent 8-10 hours taking out the dash only to find the new aluminum (China made) core sprang a leak in less than a year. A company called Brassworks was quoted to make one for about $300 which is probably similar to the dealer's Mopar price(if they still sold them). A company called Thermal Solutions Manufacturing was the last to make an actual Brass/Copper core-see attached. I need an old core for "the mold".
There are some pics in this thread;
https://www.cherokeeforum.com/f51/97...cement-219723/
I don't think I have the part number unfortunately. It was branded as a Murray though - might be possible to find a NOS one
10-04-2018, 08:01 AM
#15
Newbie
Thread Starter
Join Date: Sep 2011
Location: Michigan
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
99 xj discarded heater core
Great! Start looking and I will make it worth your while! At least what Amazon charges for a new one about $32 ( See attached) plus the 2 day shipping. I just checked on Amazon and a model 2000 will fit. I'm at syrinx7@msn.com
Thanks
JAS
Thanks
JAS