JDS123

I did not want to open the super old thread, however here is my issue.

I cleaned and adjusted my NSS on my 1998 xj last year and it fixed everything, however this time its all the way bad because it will only start with the conecter cheated by bridging the pins bypassing the NSS.

I saw a post from you talking about that causing shifting issues due to the elctronic tranny.

About 2 days or so after cheating my nss I started having shifting problems off and on, waiting till 4500rpm to shift at times and stuff like that.

Can you elaborate on why that actually happens and do you think thats exactly whats happening to me?

I have a new nss to put in now.


Here is a copy of your post.

Any info from anyone would be great.


Old 11-21-2009, 10:12 PM #7
SeriousOffroad
CF Veteran

Join Date: Apr 2008
Posts: 13,951

View SeriousOffroad's Photo Album My Photos
Cherokee
Default
Hope you folks understand that the NSS does more than just prevent starting while in gear.

The range selector signal also goes through the NSS. This signal is needed to allow for proper shifting of your electronically shifted tranny.

JDS123

I may have posted this in the wrong area?

DFlintstone

No, you are fine. Weekends can just be slow. Also haven't heard much from Offroad lately...

Turbo X_J

try this:

JDS123

Oh sorry bud, didn't mean I was in a hurry, just wasn't able to find my thread again but I think it took awhile to post.

Thanks for the info though. Take care.

JDS123

I'll certainly check that too, thanks bro.

cruiser54

The NSS also sends info to the TCU as to what gear the trans is in.......

JDS123

So it's likely why I'm experiencing the shifting issue now then? Sounds like it to me.

cruiser54

Possibly.

Go to www.cruiser54.com and do Tips 1 and 10 and see what happens.