Slackdaddy

2000 XJ
I need 2 new of the plastic clips that snap into the frame rail that holds the Fuel, Brake and emissions lines.
The 2 rear ones if they are different.
I can not find a source for them,, I may be searching the wrong terms?

Nick

Slackdaddy

Here is what it looks like,, any ideas where to get em ?

4.3L XJ

Best source might be a wrecking yard or you will have to get them from Jeep

Dave51

52100286AC - Discontinued.

Search Fuel Bundle Clip

https://parts.airparkdodgechryslerje...dle-68149655aa

https://www.quadratec.com/products/51301_0038.htm

Slackdaddy

Thanks for the info,,
Unfortunately the used ones break when removing them.

Turbo X_J

That part has been revised, this is what it looks like now:

gat

If the connector to th frame brakes, but the four connectors to the lines are in tact, then I'd connect the four lines and twist a wire around the frame to hold them secure. I prefer wire to plastic ties. They do better with heat and friction.

fb97xj1

If zipties arent your thing, cut a couple sections of rubber hose with an inside diameter that is the same outside diamater as the line, or slightly smaller. Slit the hose lengthwise, and slip them over the line. A clip or two along the length would be nice tho, to anchor the lines. Point being that zipties are not the only option.

Slackdaddy

Yup,, I'll be doing the rubber hose and clamp thing.