front fenders??
#1
Member
Thread Starter
Join Date: Mar 2009
Location: Houston TEXAS
Posts: 248
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
front fenders??
If my front fenders both have pretty big dents in them. Is there any way to get to the inside of the fender to pop them back out?
#3
Senior Member
Join Date: Dec 2008
Location: Leeds, Maine
Posts: 532
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee
Engine: 4.0
It depends how bad and where on the fender they are. I just did that to both fenders on the rig I bought. The DS had a couple of dents up high near the hood & just in front of the tire. The PS had damage at the back of the fender near the door from the door catching it when it opened.
I'm planning to re-paint so I took both fenders off & used a body hammer & dolly to straighten out the dents. It's about the only way to do it right unless you can get at the dent easily. There are tricks like heating the metal, then putting dry ice on it to pop the dent or suction cup type tools, but that only works on certain types of dents.
Good luck!
I'm planning to re-paint so I took both fenders off & used a body hammer & dolly to straighten out the dents. It's about the only way to do it right unless you can get at the dent easily. There are tricks like heating the metal, then putting dry ice on it to pop the dent or suction cup type tools, but that only works on certain types of dents.
Good luck!
Thread
Thread Starter
Forum
Replies
Last Post
Mmll52
Modified XJ Cherokee Tech
6
09-02-2015 10:01 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)