front driveshaft CV centering ball
#1
Newbie
Thread Starter
Join Date: Oct 2008
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
front driveshaft CV centering ball
so i got the angrey sparrows syndrome, know how to fix it. but the write up by stu olsen i read is for a TJ, is the driveshaft on the xj the same thing? as in, part numbers etc.? if not, where's the best place to get a new centering ball kit? figured murrays/autozone/advance wouldnt have the centering ball kit, i know they got the ujoints. thanks
#3
::CF Administrator::
Join Date: May 2008
Location: Okc area
Posts: 10,039
Likes: 0
Received 15 Likes
on
11 Posts
Year: 1991
Model: Cherokee
Engine: 4.0 I6
Are you talking about the yoke or the flange? Have a link to the writeup? Then I could look at what you are talking about and maybe point you in the right direction..
#4
::CF Administrator::
Join Date: May 2008
Location: Okc area
Posts: 10,039
Likes: 0
Received 15 Likes
on
11 Posts
Year: 1991
Model: Cherokee
Engine: 4.0 I6
Ok found the item..It's called a CV Centering Yoke an napa sells them for a 91 XJ at about $77
Also crown sell the parts.. http://www.crownautomotive.net/catalog/axle/yoke2.htm
Also crown sell the parts.. http://www.crownautomotive.net/catalog/axle/yoke2.htm
Last edited by okcjeeper; 10-14-2008 at 02:22 PM.
#6
Senior Member
Join Date: Jul 2008
Location: Orlando, FL
Posts: 662
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0L
i had to rebuild mine but I was able to get the parts from advance auto parts. If your looking to replace the ball, spring and seal this is the kit part number 70081NG.
Trending Topics
#9
Newbie
Thread Starter
Join Date: Oct 2008
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
i bought the ujoints from napa, but didnt do the ball kit im waiting to get my ujoint tool anyways. is the ball hard to remove? ive heard some drilling and/or torching is involved?
#10
Senior Member
Join Date: Jul 2008
Location: Orlando, FL
Posts: 662
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0L
Its not super hard. I had to cut mine out with a dremal. I was able to remove the ball first then cut the sleve out.
#11
I broke the centering yoke replacing the u joints. I couldent find one at napa or anywhere except here, it looks like the correct one in the picture but I dont know. Does anyone know if this one is correct or where to get one? When you go to the link scroll down to
Standard 1310, 1330, 1350 CV Centering Link
http://www.arizonadrivelines.com/dri...rdan_type).htm
Standard 1310, 1330, 1350 CV Centering Link
http://www.arizonadrivelines.com/dri...rdan_type).htm
#12
CF Veteran
Join Date: Apr 2011
Location: Dayton Ohio
Posts: 2,080
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998 classic
Model: Cherokee
Engine: 4.0!!
revival! LOL this actually helped me. I have the sparrow sound going on and in the middle of reuilding the cardian. found this in the hunt for the part number!
#13
CF Veteran
Join Date: Feb 2012
Location: Hamburg AR
Posts: 1,249
Likes: 0
Received 12 Likes
on
11 Posts
Year: 1995
Model: Cherokee
Engine: 4.0 HO
I got mine from Oreilly's
http://www.oreillyauto.com/site/c/se...kee&vi=1180268
life time warranty. I also replaced both u joints when I replaced the center ball joint. 9.99 each I think. I done it in about 2 hours while drinking some beer. Mine was simple I did not run into any problems. I was able to hammer my old ujoints out without a press.
http://www.oreillyauto.com/site/c/se...kee&vi=1180268
life time warranty. I also replaced both u joints when I replaced the center ball joint. 9.99 each I think. I done it in about 2 hours while drinking some beer. Mine was simple I did not run into any problems. I was able to hammer my old ujoints out without a press.
#14
CF Veteran
Join Date: Apr 2011
Location: Dayton Ohio
Posts: 2,080
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998 classic
Model: Cherokee
Engine: 4.0!!
was there a good method to getting out the ball and its sleeve? I got the new cv ball kit from advanced.. now trying to get the old out!!
Thread
Thread Starter
Forum
Replies
Last Post
australian_expat
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
09-02-2015 09:02 PM
RickJames Bish
Modified XJ Cherokee Tech
5
09-02-2015 03:22 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)