Found this LS1 conversion in a Cherokee
Trending Topics
#11
CF Veteran
Join Date: Oct 2008
Location: Hell, CA
Posts: 2,127
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1989
Model: Cherokee
Engine: 4.0L I6
LS motors are great! Altho, unless the LS motor was cheap, I woould go with a LQ4/9 6.0L truck motor (cast iron block vs alum) and do a LS intake swap on it. If/when my 4.0L dies and I decide not to build a stroker out of it. An LSx motor is going in!
#12
Senior Member
Join Date: Dec 2008
Location: northwest Indiana USA
Posts: 606
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990 laredo
Model: Cherokee
a while back someone had a v8 swap thread here asking what engine to use and I said Ls1. Seeing this makes me wish I had a couple grand lying around...
#14
Its funny that you say that because I have spent weeks figuring everything out for the conversion to do it in my xj, the aluminum LS is almost 100 pounds lighter than the stock 4.0 and the cast iron LQ9 is ten pounds heavier. So you add ten pounds and double the horsepower and torque....sounds good to me. Throw the 4L60E with a shift kit and some upgrades behind it and a nice gear to gear t-case, you have yourself one hell of a ride.
Novak-adapt.com <--almost everything you need.
Novak-adapt.com <--almost everything you need.