Shocker0316

Anyone know how to bypass the fog lights to where they stay on when you turn on the high beams?

carbuff

This was for my 2000. Remove the drivers headlight. On the h4 bulb connector there are 3 terminals. One of them has 2 red wires. One of them is the12v for the high beams. The other goes to the foglight relay. Figure which one goes to the relay and cut that one off and ground it. I spliced mine right into the black wire on the h4 connector. You will then be able to use your fogs with running lights, low beams and high beams. I also have an upgraded harness installed but that should work the same without one. Mines a 2000 4.0 auto with no drl.