GeeWhiz

im getting ready to fix my rusty floors and was wondering if theres anything i should know before i start. i read some other threads and was curios if there was anything different about a 1990 limited or if theres anything i should look out for that might be unfixable. thanks

marc_41_745

with an xj there is nothing unfixable. search it, there is alot of posts about it

96Cherokee113

I just did all my floors and I have a few helpful tips. First off, wear a respirator, because after grinding all the rust off, I was coughing up black phlegm...yummy. Also, be careful by the brakelines on the drivers side floors area. And if you have to do the cargo area like I did, be very careful near the gas tank, especially if you're welding it. Other than that, just watch out for the wires under the carpet and measure twice, cut once. I pretty much did a write-up on how to repair a rusty floor in my build thread if you need any ideas. Good luck and post up some pics.

4.0CherokeeSport

Grind shop mafia spoken like a professional
nothing like pullin out the grinders & welder doin some real work

GeeWhiz

ok thanks guys, ill put up some pics when i get a chance

GeeWhiz

i took a few pictures of the rust in the cargo area and under the rear seat. i still need to get the rest of the interior out and ill post some more pics when i do

4.0CherokeeSport

you got alot ofwork ahead of you! if you can blast it(they make small portable ones) will really help

marc_41_745

thats what my 88 looked like when i bought it

GeeWhiz

well this is what i found when i pulled my seats and carpet...
http://img153.imageshack.us/i/gedc0011.jpg/
http://img145.imageshack.us/i/gedc0012.jpg/
http://img707.imageshack.us/i/gedc0010n.jpg/