Exhausted with my vibration issue !!
#1
Newbie
Thread Starter
Join Date: Mar 2009
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Exhausted with my vibration issue !!
I have a 01 sport with right at 6" of lift recently added. At the same time I installed a SYE hack and tap and 4 degree shims which put me right at 2 degrees down on the rear pinion. According to all the write-ups this is where I need to be. My vibes are happening at speeds above 40 only when maintaining frwy speeds and completly go away when I take my foot off the gas. I thought my pinion was increasing under load so I installed a MORE Traction bar that seemed to completely eliminate all axle wrap. My vibes got slightly better but are still there. Do I need to drop my pinion more? I ordered some 2 degree shims and there seems to be a huge difference between the 2 and 4s. I'm worried that this will be too much ! Any ideas ?? Please-thanks !!!!
Thread
Thread Starter
Forum
Replies
Last Post
Psiegrist1
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
34
03-17-2022 02:15 PM
shelby5041
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
39
11-07-2015 01:22 AM
Dannymac1216
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
09-08-2015 06:28 AM
SouthSeaPirate
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
17
09-07-2015 06:47 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)