Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

exhaust manifold

Thread Tools
 
Search this Thread
 
Old 11-15-2012, 12:14 PM
  #1  
Junior Member
Thread Starter
 
kansasxj's Avatar
 
Join Date: Jun 2010
Location: Ozawkie
Posts: 84
Likes: 0
Received 0 Likes on 0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0
Unhappy exhaust manifold

So my jeep has a cracked exhaust manifold (surprise surprise). I cant afford a header or a new manifold at this time, and i dont have time to pull the old one out to try to weld, or braze on it to bandage it till i can afford a new one. does anyone have a band aide solution that doesn't require pulling the exhaust out, but will seal that leak for a month or two? i have tried this "muffler puddy" that comes in a squeeze tube. It works for a week or so and then cracks and chips away.
Old 11-15-2012, 04:00 PM
  #2  
CF Veteran
 
ZINGGG's Avatar
 
Join Date: Oct 2011
Location: Seal Beach, CA
Posts: 4,440
Likes: 0
Received 2 Likes on 1 Post
Year: 1996
Model: Cherokee
Engine: 4.0 HO Straight Six
Default

You basically just listed off all the solutions for a cracked manifold and said you can't do any of them. So that muffler puddy or something like JB weld is going to be your best bet until you can replace it.
Old 11-15-2012, 04:12 PM
  #3  
Senior Member
 
Sno_Blynd's Avatar
 
Join Date: May 2010
Location: North Carolina
Posts: 824
Likes: 0
Received 0 Likes on 0 Posts
Year: 2000
Model: Cherokee
Engine: inline 6 4.0 lt
Default

Originally Posted by 1996sportXJ
You basically just listed off all the solutions for a cracked manifold and said you can't do any of them. So that muffler puddy or something like JB weld is going to be your best bet until you can replace it.
yea i was gonna say jb weld too
Old 11-15-2012, 04:15 PM
  #4  
Seasoned Member
 
iluvmud's Avatar
 
Join Date: Jul 2012
Location: Fort Worth
Posts: 417
Likes: 0
Received 0 Likes on 0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Default

JB weld can handle that kind of heat? i have a hairline crack and have been dragging ***** on buying my manifold yet....
Old 11-15-2012, 04:16 PM
  #5  
CF Veteran
 
Big David's Avatar
 
Join Date: Jun 2011
Location: Gainesville GA
Posts: 2,719
Received 42 Likes on 31 Posts
Year: 1999
Model: Cherokee (XJ)
Engine: 4.0
Default

E-bay.$150 or less shipped.SS, ceramic coat.

CHEAP!
Old 11-15-2012, 04:19 PM
  #6  
Seasoned Member
 
iluvmud's Avatar
 
Join Date: Jul 2012
Location: Fort Worth
Posts: 417
Likes: 0
Received 0 Likes on 0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Default

I'm buying this one.... little more but seems to address some of the issues that plague these manifolds...

http://www.ineedparts.com/apn-jeep-e...-manifold.html
Old 11-15-2012, 04:29 PM
  #7  
CF Veteran
 
ZINGGG's Avatar
 
Join Date: Oct 2011
Location: Seal Beach, CA
Posts: 4,440
Likes: 0
Received 2 Likes on 1 Post
Year: 1996
Model: Cherokee
Engine: 4.0 HO Straight Six
Default

Originally Posted by iluvmud
I'm buying this one.... little more but seems to address some of the issues that plague these manifolds...

http://www.ineedparts.com/apn-jeep-e...-manifold.html
That's the best one for the price out there
Old 11-15-2012, 04:30 PM
  #8  
CF Veteran
 
ZINGGG's Avatar
 
Join Date: Oct 2011
Location: Seal Beach, CA
Posts: 4,440
Likes: 0
Received 2 Likes on 1 Post
Year: 1996
Model: Cherokee
Engine: 4.0 HO Straight Six
Default

And take a look at your motor mounts before tearing everything apart to do the manifold. Chances are, you should replace those at the same time
Old 11-15-2012, 04:35 PM
  #9  
Seasoned Member
 
iluvmud's Avatar
 
Join Date: Jul 2012
Location: Fort Worth
Posts: 417
Likes: 0
Received 0 Likes on 0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Default

Originally Posted by 1996sportXJ
That's the best one for the price out there
Exactly... youre the one that showed me that

Originally Posted by 1996sportXJ
And take a look at your motor mounts before tearing everything apart to do the manifold. Chances are, you should replace those at the same time
Thanks... more money to spend thanks for the FYI
Old 11-15-2012, 04:44 PM
  #10  
CF Veteran
 
Programbo's Avatar
 
Join Date: Jan 2009
Location: Baltimore, Maryland
Posts: 1,964
Likes: 0
Received 6 Likes on 6 Posts
Year: 1994 1993
Model: Cherokee
Engine: 4.0
Default

Originally Posted by iluvmud
JB weld can handle that kind of heat? i have a hairline crack and have been dragging ***** on buying my manifold yet....
Mine has just a hairline crack too so I haven't bothered fixing it yet. I got a good exhaust manifold at the junk yard but it's just sitting in my basement. I tried JB weld and it just dried up and fell off. I may try some of the high temp silicone since it's flexible
Old 11-15-2012, 04:54 PM
  #11  
Member
 
cdhebert's Avatar
 
Join Date: Oct 2010
Location: Gonzales, Louisiana
Posts: 177
Likes: 0
Received 0 Likes on 0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
Default

Originally Posted by Programbo
Mine has just a hairline crack too so I haven't bothered fixing it yet. I got a good exhaust manifold at the junk yard but it's just sitting in my basement. I tried JB weld and it just dried up and fell off. I may try some of the high temp silicone since it's flexible
Pretty sure that wouls be a waste of expensive silicone...
Old 11-15-2012, 05:13 PM
  #12  
Senior Member
 
Gauge's Avatar
 
Join Date: Sep 2012
Location: Largo, FL
Posts: 509
Likes: 0
Received 0 Likes on 0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0 HO
Default

Originally Posted by iluvmud
Exactly... youre the one that showed me that



Thanks... more money to spend thanks for the FYI
I am waiting for shipping to deliver my APN header tomorrow. In the meantime, I just picked up Energy Suspension motor mounts for $40, to swap them out before I swap out headers.

Ineedparts.com is definitely someone that will see more of my business. I ordered this past Friday, when they were out of stock; expecting to have them in stock by the middle of the month. I emailed them Monday morning to get an idea when they should get them in stock. I got a reply w/in an hour stating that they expect to have them by the end of the week and I should receive it in up to 3 days afterwards. Well, email was monday... they said in stock by end of week and I should have a few days after they get it. I was expecting it to show up by mid next week. But, according to FedEx, it will be at my door tomorrow.
Old 11-15-2012, 06:03 PM
  #13  
CF Veteran
 
ZINGGG's Avatar
 
Join Date: Oct 2011
Location: Seal Beach, CA
Posts: 4,440
Likes: 0
Received 2 Likes on 1 Post
Year: 1996
Model: Cherokee
Engine: 4.0 HO Straight Six
Default

Originally Posted by iluvmud
Thanks... more money to spend thanks for the FYI
My pleasure. You drive an XJ, better get used to that
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cpnwrench
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
02-15-2024 08:09 AM
jmsummers2012
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
53
04-30-2021 02:35 PM
libengan
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
14
11-06-2015 09:16 AM
Crimmy
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
10-01-2015 06:43 PM
xjcherokee2000
Modified XJ Cherokee Tech
4
09-29-2015 08:28 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: exhaust manifold



All times are GMT -5. The time now is 10:24 PM.