electronic throttle control
#1
Newbie
Thread Starter
Join Date: Mar 2011
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
electronic throttle control
just bought got a 2006 cherokee 2.8 crd . e,c,t warning light is flashing. sometimes goes off after a run and i restart it . anybody got any ideas .
#2
CF Veteran
Join Date: May 2008
Posts: 3,018
Likes: 0
Received 13 Likes
on
13 Posts
Year: 1988
Model: Cherokee
Engine: AMC242
European market? If so, then you don't have an actual "Cherokee" (even if it's called that,) you have the export version of the "Liberty" - which is marked internally as a "KJ" instead of an "XJ".
You may try posting under Liberty tech instead - or finding a Liberty forum - but the 2.8L CRD is uncommon here - and is, I believe, primarily an engine used in the European market. (We've been trying to get the CRD to be more common over here, but without much luck.)
It's the "2006 Cherokee" and "CRD engine" that tell me you're probably in Europe... I didn't know that was a "drive-by-wire" setup, tho.
You may try posting under Liberty tech instead - or finding a Liberty forum - but the 2.8L CRD is uncommon here - and is, I believe, primarily an engine used in the European market. (We've been trying to get the CRD to be more common over here, but without much luck.)
It's the "2006 Cherokee" and "CRD engine" that tell me you're probably in Europe... I didn't know that was a "drive-by-wire" setup, tho.
Thread
Thread Starter
Forum
Replies
Last Post
Psiegrist1
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
34
03-17-2022 02:15 PM
BlvdKreeper
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
09-20-2015 01:16 PM
HappyTrails
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
6
09-14-2015 08:54 PM
Dannymac1216
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
09-08-2015 06:28 AM
mtoskippy
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
0
09-03-2015 09:21 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)