THare22

So long story short I'm stuck to re wire my ignition after quite the fiasco and am having a little trouble just need some straight answers.

I've provided pictures as best I can. I understand to connect the corresponding colors however can't figure out where to connect the black and red wire running from the engine.




Currently the red is connected to the pink and black wire as shown above. Is this correct? Or where should it be? I've already looked for a red or black near the key ignition.

Below is where the red and black are coming from.

THare22

Also it is a 1999 Cherokee. Thanks

prcherokee

Trace the two wires on the engine bay,they look like an add on.They are not part of the oem harness.

THare22

You are correct it was an add on. I removed it. Now I just need to connect the yellow as it is the only severed. I'm headed to hardware store to get a connector. Anything else I should know? Thanks so much man

prcherokee

Personally I do not use connectors, I always solder the wires.

THare22

Well got everything connected but still won't start. All the lights are on. Any idea where to go from here?

prcherokee

What happened to the wiring that you had to fix it ? Where did the Red and black wires were connected.