Driver Brake Light Problem
 

Appreciate the help. Rear running lights work, when brake is pressed the driver site does not illuminate, passenger side works. When running lights are on, driver side stays same half illuminated when brake is pressed. I’ve checked fuses. Don’t think it’s a ground problem since running lights work. Any ideas?

Cant drive, don’t want a ticket!!

thanks.

You need to remove the light and check the wiring and see what voltage you are getting to the bulbs and test the ground .

The area behind the spare tire panel contains several electrical connectors, one of which is for the tail light assembly. Those wires are 20 gauge and just a little bit of corrosion can cause good connections to be lost. Just a tiny bit of rust in the wheelwell can allow water to do it's thing.

https://cimg7.ibsrv.net/gimg/www.che...45439623f5.jpg

Hello ry_Robi,
We are certainly sorry to hear about your recent concern. If you do end up getting your vehicle towed to a Jeep dealer, please keep us updated. If you need any additional assistance throughout that process, please follow up with our team privately. We're happy to assist.
Laura
JeepCares