door handle/hood latch problem
Thread Starter
Junior Member
Joined: Nov 2010
Posts: 78
Likes: 0
From: concord nc
Year: 1994
Model: Cherokee
Engine: 4.0
hey guys my door handles are hard to open from the outside i believe there just gummed up how do i clean em any suggestions also when u pull the hood latch u have to ****** on it pretty hard to get it to release
Junior Member
Joined: Sep 2010
Posts: 40
Likes: 0
From: Indiana
Year: 2000
Model: Cherokee
Engine: 4.0L I6
Not sure about your door handles, but go easy on the hood latch handle...
The coupler that connects the pull cable to the... Um... Bars (technical term?)... That open the hood latches is what gets grimed up. Get some general automotive grease, and be really liberal with it in and around that coupler - doesn't hurt to do the same thing at the actual latches, too. Give the handle a few pulls with the hood up to get the grease worked in there, then shut it and give it a go.
If you leave it the way it is, you're likely to yank the cable out of the coupler - it has happened before.
The coupler that connects the pull cable to the... Um... Bars (technical term?)... That open the hood latches is what gets grimed up. Get some general automotive grease, and be really liberal with it in and around that coupler - doesn't hurt to do the same thing at the actual latches, too. Give the handle a few pulls with the hood up to get the grease worked in there, then shut it and give it a go.
If you leave it the way it is, you're likely to yank the cable out of the coupler - it has happened before.
Thread
Thread Starter
Forum
Replies
Last Post
96Co
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
12
Jan 10, 2024 06:17 AM
Rotorhead
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
20
Sep 23, 2023 04:17 PM
hpwrestler220
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
Aug 31, 2015 11:32 AM
CYTEHTR
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
Aug 30, 2015 08:29 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



