Anyone try a Moog K160039 as a coil spacer for up country lift
03-12-2020, 02:53 PM
#1
Junior Member
Thread Starter
Anyone try a Moog K160039 as a coil spacer for up country lift
UP Country lift Any one try a
instead of a regular coil spacer such as below on an upcountry. So one would use the moog spacer then use the Crown Coil isolator on top.
Anyone see any issues with this?
1996 Jeep Cherokee (XJ) Rubicon Express .75" Coil Spring Spacer Lift Kit - RE1333 (https://www.4wheelparts.com/p/rubico.../R-BKTG-RE1333)
03-12-2020, 03:07 PM
#2
CF Veteran
Haven't seen anyone mention using those. A lot of us just use a Teraflex 3/4" spacer without the isolator.
https://www.quadratec.com/products/16190_2001.htm
Actually at some point I just may go with Rust's 2" coils:
https://www.rustysoffroad.com/rustys...j-2-front.html
https://www.quadratec.com/products/16190_2001.htm
Actually at some point I just may go with Rust's 2" coils:
https://www.rustysoffroad.com/rustys...j-2-front.html
03-12-2020, 04:36 PM
#3
Junior Member
Thread Starter
So the Teraflex 3/4" spacer with out the isolator serves as the isolator plus 3/4" spacer? Seems that way with the dimensions.
Thread
Thread Starter
Forum
Replies
Last Post
bobvalli
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
14
12-11-2010 08:47 PM
z.rose188
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
10-20-2010 08:53 AM
lukc22
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
12
05-19-2010 08:24 PM
Ethan57
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
01-04-2010 05:57 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
