andybird

Hello

Im trying to find an exhaust full system or just cat back for my XJ 2001 4.0L (3960L 181 BHP)

I live in the UK and all I can find are exhaust systems that companys say thats the right after market exhaust, so I order it and it completely wrong.

The main dealer says that my exhaust is discontinued and I know I can get one made up but the price is far to much.

Ive added a pic of the exhaust I need. MIne is the 52101 262AH flanged exhaust.

Can any body help in locating one

Cheers

Ralph77

Can you access Walker parts in the UK? Is yours an American Version or a European version? And if an American version is it Federal or CA Emissions? What is the manufacture date?

andybird

Hello Ralph
Mine is a right hand euro model. Manufacture date is January 2001. I'll try the wedsite you mentioned
Cheers

Ralph77

So I just replaced the whole exhaust on my '00. Mine is a CA Emissions with a 4/2000 build date. Best I can tell is that your Euro version would be a Federal Version. But do not quote me on that. I am thinking you have the dual exhaust manifolds. Is this what your Y pipe from the the exhaust manifolds look like?

http://www.walkerexhaust.com/catalog...g-lookup/52439

Then the Crossover pipe:

http://www.walkerexhaust.com/catalog...g-lookup/53440

Thinking this is your Cat;

http://www.walkerexhaust.com/catalog...g-lookup/16117

Thinking this is your muffler:

http://www.walkerexhaust.com/catalog...g-lookup/21489

And tailpipe:

http://www.walkerexhaust.com/catalog...g-lookup/55188

Thinking the rear hanger on that tailpipe will need to be cut off.

Lots of guessing going on here. So the Y pipe has a flange on the end. The Crossover pipe has flanges on both ends, This gasket will be used on both ends of the Crossover Pipe:

http://www.walkerexhaust.com/catalog...g-lookup/31625

The cat has flanges at both ends and one O2 sensor bung at the rear. The muffler just has a flange up front. No gasket between the two.

So two of these. One will secure the tailpipe to the muffler. One gets used in conjunction with the rear hanger.

http://www.walkerexhaust.com/catalog...g-lookup/35336

http://www.walkerexhaust.com/catalog...g-lookup/36377

And the isolator;

http://www.walkerexhaust.com/catalog...g-lookup/35750

Again lots of guessing going on here. Plus the front of the Y is bolted to the exhaust manifolds with bolts and spring clips.

Bolts 6505754AA will need 4
Spring Clip/Nut 650654AA will need 4

These I got from my Jeep Dealership.

The reason that I have a vague clue is because I replaced my entire exhaust, fronts dual cat set up back.

You need to be very careful with what I have posted. Lots of guessing going on here.

andybird

Thanks for that. A great help. I'll read up and check your findings once I'm home from work. I'll let you know how I get no.

andybird

Ive found the walker parts on the US Ebay site, but now everybody is saying that it MIGHT not fit because there made for a left hand drive car and mine is right. Whats your thoughs please.
Cheers

freegdr

These....http://www.walkerexhaust.com/catalog...catalog-lookup

freegdr

http://www.walkerexhaust.com/catalog...g-lookup/21489....

andrewmp6

Look for a small local exhaust shop,They can build you any exhaust you want and maybe cheaper.

freegdr

Motors exhaust manifold is on passenger side on yours correct . Wheres your tail pipe exit ?

andybird

Hi. Yes the manifold is on the passenger side. Tail pipe exit is on the drivers side

MWMahoneyJr

According to my Crown Automotive catalog, only the 2.8L Manifold cares if the Cherokee is right hand drive. For the 4.0 - everything appears to be the same: tailpipe assemblies and catalytic converter part numbers don't seem to care.

Manifolds - 2.8L Right Hand Drive is different.


No RHD or LHD differentiation.


Again, no Right or Left drive distinction.

andybird

Hello. Thanks for the info. So If I order the muffler and tailpipe from walker it should fit.

MWMahoneyJr

Totally. At least in the US. Any muffler shop can bend pipes and weld on a muffler in under an hour, maybe faster if there's pizza involved.

MWMahoneyJr

If the muffler and tailpipe run along the right hand side of the vehicle, up over the transmission crossmember (on the right of the transmission) and exit behind the right tire - you should be fine.

I can take some pictures the exhaust of my American, Left-hand drive XJ when I get home this evening.