thebrow89

i just put o y 6.5 in rough country lift. i have a death wobble that hits at about 45mph. i havent had an alingment done yet. is there a chance gettin her alinged will stop that?
it also doesnt turn nearly as tight as it used to any idea y. or if the issues may be conectted

warthog

yes get it aligned, and are you tires rubbing on you lca's or sway bar.
what is you backspacing on your rims?

what all parts came with this kit?

thebrow89

im not sure of the back spacing on the rims but i kno the tires arent hitting the control arms i checked that already. hte kit came with track bar coil springs upper and lower adjustable control arms shocks and pitman arm.

smitysjeep4x4

yes get it aligned. make sure the track bar bolts are tourqed.

mike albo

x2 on the alignment and torque all the bolts

COSXJFAN

If you put the ACAs on, you need to have the shop check the caster. That can, and will, cause DW. Good luck finding an alignment shop that will do it, I looked all over CS, and couldn't find one!! I just bought an angle finder, and did it myself. HTH!!

thebrow89

angle finder?