I was driving to work yesterday when I noticed that my Speedometer and Tachometer were at 0 and, where my tachometer is, the words 'no buS' appeared. Along the way they seemed to pop back on and then off a couple of times. After work on my way home ALL of my gauges were not working (fuel, temp, etc). Had to run some errands and by the time I got home everything was back up and running. This morning everything was working too. I've read some posts and have heard people talking about checking the Camshaft Position Sensor, which I plan on doing. Any other suggestions?

Thanks in advance for any help.

 

It is a common problem on our Jeeps. It has noting to do with your cps. You have either a loose or dirty connection (if not both) on the back of the cluster. Remove the cluster and clean all of the connections also make sure that the ground is tight.