Dash Panel Swap
08-13-2018, 09:57 PM
#1
Member
Thread Starter
Join Date: Oct 2012
Location: SE Michigan
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.6L Stroker
Dash Panel Swap
I recently picked up an '89 2-Door Cherokee but am not a fan of the interior. Plus the dash is pretty chewed up and janky. I have a very complete 2000 4-Door that I am possibly parting out. Obviously the early and late body interiors are different, but how similar is the sheet metal behind the dash that I could move the dash board, gages, center console from the 4-Door '00 into the 2-Door '89?
08-14-2018, 12:36 AM
#3
Senior Member
Join Date: Mar 2010
Location: Alaska
Posts: 589
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee(XJ)
you will be looking at some modifications im sure, ive just used a bottom dashboard panel from 89 into 94 and had to remove the metal cause that was mounted in a different way and you cant tell the difference now but needed some work.
-Marc
-Marc
08-14-2018, 05:26 AM
#4
Member
Thread Starter
Join Date: Oct 2012
Location: SE Michigan
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.6L Stroker
Wiring may be tricky, but its running a mechanical diesel with a manual trans, so I am thinking about gutting most of the electrics.
Thread
Thread Starter
Forum
Replies
Last Post
FS[SouthEast]: 97-01 HVAC panel and switch panel w/fog
ckcstewart
Miscellaneous
8
03-23-2014 06:28 PM
Axel1831
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
02-29-2012 06:24 PM
the_crazy_russian@hotmail
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
11-24-2009 08:13 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)