Jeep Cherokee Forum

Jeep Cherokee Forum (https://www.cherokeeforum.com/)
-   Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here (https://www.cherokeeforum.com/f2/)
-   -   cylinder 6 missfire (https://www.cherokeeforum.com/f2/cylinder-6-missfire-47474/)

mike20 05-13-2010 02:43 PM
cylinder 6 missfire
 
i just installed the banks torque tube headed on my jeep, and now im having a horrible miss in cylinder 6. Its getting the signal from the ecm so i have no clue what else could cause this. of anyone has any ideas id greatly appreciate it

thanks

cdeal28078 05-13-2010 03:35 PM
Plug wire burnt by header tube?
clint

Hommersimpson 05-13-2010 03:59 PM
Originally Posted by mike20 (Post 538710)
i just installed the banks torque tube headed on my jeep, and now im having a horrible miss in cylinder 6. Its getting the signal from the ecm so i have no clue what else could cause this. of anyone has any ideas id greatly appreciate it


thanks
sounds like you need to check for intake leak....around #6... spray some carb cleaner around intake.. if it sounds better then intake leaking...

mike20 05-13-2010 04:05 PM
all the wires look good no frays that i can see

rivercrazy 05-25-2010 04:32 PM
Sup Mike! Did you ever get it fixed? I think my wifes ZJ might have an intake leak too. Its had a random #6 misfire since we got it.


All times are GMT -5. The time now is 12:32 AM.


© 2024 MH Sub I, LLC dba Internet Brands