cry 8.25 problem
#1
Senior Member
Thread Starter
Join Date: Dec 2009
Location: zeeland mi
Posts: 538
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1997
Model: Cherokee
Engine: 4.0
cry 8.25 problem
need to know if your exposed to be able to pull your axle shaft out about an 1/8 inch when jacked up am at a loss with my rig please help someone
#3
Normal for the axle to move in and out a little bit. 1/8 seems a bit much but not terrible.
Remember it's a c-clip axle.
If you are really concerned about it, pull the diff cover and slip some feeler gauges between the cross pin and the axle shafts then post up your measurements.
Remember it's a c-clip axle.
If you are really concerned about it, pull the diff cover and slip some feeler gauges between the cross pin and the axle shafts then post up your measurements.
#5
CF Veteran
Join Date: Jan 2009
Location: Northfield MN
Posts: 1,242
Likes: 0
Received 4 Likes
on
4 Posts
Year: 1995
Model: Grand Cherokee
Engine: 5.2 v8
I dont have that much play on mine.....but im not sure what sort of play is within specs...
Last edited by storm101; 01-27-2010 at 09:23 PM.
Thread
Thread Starter
Forum
Replies
Last Post
jmarzo
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
16
10-18-2022 04:11 PM
Psiegrist1
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
34
03-17-2022 02:15 PM
Ricardo Siqueiros
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
09-03-2015 09:17 PM
Jeepy11
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
09-03-2015 09:32 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)