Cruse Control
#1
Newbie
Thread Starter
Join Date: Feb 2018
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee(SJ)
Cruse Control
I have a 1995 jeep Cherokee and the cruse control does not work nor did it when i purchased it, any one have an answer to how i can located the problem??
#2
Senior Member
Join Date: Sep 2008
Location: Sioux Falls, SD
Posts: 897
Likes: 0
Received 12 Likes
on
9 Posts
Year: 1999
Model: Cherokee(XJ)
Engine: 4.0L
Its the wires at the base of the turn-signal stalk. They break there. If you are mechanically and electrically inclined it can be fixed for cheap.
You will need a USB cable. Dead mouse, extension or whatever.. You will need to solder new wires onto the existing wires where they are broken and run the new cable down the steering column.
Jeep used GMs cruise controller and GM used solid-core copper wire in an area that needs to flex (fail). Using USB cable will fix it for a loooong time.
You will need a USB cable. Dead mouse, extension or whatever.. You will need to solder new wires onto the existing wires where they are broken and run the new cable down the steering column.
Jeep used GMs cruise controller and GM used solid-core copper wire in an area that needs to flex (fail). Using USB cable will fix it for a loooong time.
#3
CF Veteran
If the light comes on but the jeep doesn't hold its speed you probably want to check your vacuum lines.
Do your hevac vents respond to the controls or are they stuck on defrost/screen?
Do your hevac vents respond to the controls or are they stuck on defrost/screen?
Thread
Thread Starter
Forum
Replies
Last Post
BlueXJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
75
01-09-2024 02:54 PM
finneys98xj
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
48
01-13-2019 05:10 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)