Crankshaft pulley + Serpentine belt on '94 Cherokee 4.0 [RHD]
#1
Newbie
Thread Starter
Join Date: Mar 2017
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Crankshaft pulley + Serpentine belt on '94 Cherokee 4.0 [RHD]
Hey,
I recently bought a '94 Cherokee with RHD in Australia with 262.000 KM on it.
Today, after a thorough pressure wash of the engine bay the serpentine belt slipped behind the crankshaft pulley. After taking off the belt I realised that my crankshaft pulley was more or less split into two parts.
I chose to replace the belt and the pulley but I am unsure whether I can use the regular Cherokee parts since the right hand drive alignment of the pulleys differs quite a bit from the LHD. I am also unsure whether the crankshaft pulley is the same?
atb
Goon
I recently bought a '94 Cherokee with RHD in Australia with 262.000 KM on it.
Today, after a thorough pressure wash of the engine bay the serpentine belt slipped behind the crankshaft pulley. After taking off the belt I realised that my crankshaft pulley was more or less split into two parts.
I chose to replace the belt and the pulley but I am unsure whether I can use the regular Cherokee parts since the right hand drive alignment of the pulleys differs quite a bit from the LHD. I am also unsure whether the crankshaft pulley is the same?
atb
Goon
#2
CF Veteran
Join Date: Mar 2010
Location: Broward County Fl.
Posts: 47,923
Likes: 0
Received 22 Likes
on
22 Posts
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
Dont think cank dampner would be any different....As for belt is there a number on old belt ? Also found this....https://www.cherokeeforum.com/f2/ser...lt-help-53583/
#4
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,862
Received 1,524 Likes
on
1,236 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
#6
Newbie
Thread Starter
Join Date: Mar 2017
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Okay got it all sorted.
Pulley is the same as the regular Cherokee.
The Serpentine belt length for the Right Hand Drive with automatic belt tensioner is 2500mm for the guys that want to know.
Pulley is the same as the regular Cherokee.
The Serpentine belt length for the Right Hand Drive with automatic belt tensioner is 2500mm for the guys that want to know.