Jeep Cherokee Forum

Jeep Cherokee Forum (https://www.cherokeeforum.com/)
-   Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here (https://www.cherokeeforum.com/f2/)
-   -   converting to power windows (https://www.cherokeeforum.com/f2/converting-power-windows-16789/)

toobig May 24, 2009 01:24 PM

converting to power windows
 
I've checked the threads and seen others with lots of problems with their power windows but found nothing on anyone converting from manual to power windows. I have a 92 XJ and I see a little empty panel cover right by the locks. I also heard that power windows were an option on this model so I'm assuming I can upgrade. Has anyone else ever done this and where did you buy the parts?

mobilecherokee4 May 24, 2009 02:20 PM

i want to convert from power windows to manuel so i can take my doors off

mike37 May 24, 2009 02:26 PM


Originally Posted by toobig (Post 191416)
I've checked the threads and seen others with lots of problems with their power windows but found nothing on anyone converting from manual to power windows. I have a 92 XJ and I see a little empty panel cover right by the locks. I also heard that power windows were an option on this model so I'm assuming I can upgrade. Has anyone else ever done this and where did you buy the parts?

it is doable you would need all the internal door parts from a donor jeep
plus all the switches

TrekkerJmm May 24, 2009 02:28 PM


Originally Posted by toobig (Post 191416)
I've checked the threads and seen others with lots of problems with their power windows but found nothing on anyone converting from manual to power windows. I have a 92 XJ and I see a little empty panel cover right by the locks. I also heard that power windows were an option on this model so I'm assuming I can upgrade. Has anyone else ever done this and where did you buy the parts?

First WELCOME to CF TooBig :), now on to the question. You can probably go to a JYard and get all the parts you need. AFAIK the wiring harness could even be in the doors right now. You will need switches, regulators, motors, relays and if I forgot something I'm sure someone will chime in and help...Tj

a1racer May 24, 2009 02:36 PM

welcome aboard from socal:thumbsup: and junk yard hunting will get you most of what you need like what trekker said it should not be to hard as long as you get all the wiring at the same time don't cut it up take your time to get it all in one shot if you can :cheers:

CHIF8008 May 25, 2009 03:10 AM

keep them manuel cuz power sux, especially when it gets jacked up or water damaged

jd4x426 May 25, 2009 10:02 AM

First off welcome aboard from PA now for your question alot of the xjs have the harness for the power accessories even if you dont have the particular acessory so i would look and see if your jeep has the harness already if it does that would make this project alot easier and as for the other parts the JY will be your friend and if not look for people parting out cherokees good luck

toobig May 27, 2009 06:20 PM

thanks for all the suggestions guys!

dangerousdavid May 27, 2009 09:26 PM

welcome to the group. and what the other guys said...junkyard wars have nothing on a bunch of guys that own XJ's!!!

JeepingDan May 27, 2009 09:39 PM

funny I converted my '89' to manual crank windows after having 3 bad motors and finding out how much they cost apiece $150

Schmoozer May 27, 2009 09:50 PM

Like TJ said go to the JY. I would pull two doors that have the internals and just grab the whole door. Then swap the internals and make some half doors. :thumbsup:

dangerousdavid May 28, 2009 07:15 AM

half doors sounds pretty good. anyone ever done it before?


All times are GMT -5. The time now is 06:57 AM.


© 2026 MH Sub I, LLC dba Internet Brands