Coil spacer demensions
 

hey, im looking to get a few extra inches of lifts. im planning on a gm truck shackle on the back and a coil spacer up front but money is super tight so im just gonna make my spacers, i just need to know the diameters. thanks

go to technical and scrool down to suspension that should be what your looking for

Link doesn't work. At least for me.

im stillk figurein this **** out search home made coil spring spacers for xj

use 2" ID pipe or tubing and then cut out a 4" circle from at least 1/4" plate weld them together and cut a 2" hole in the plate to match the tube. Remove spring and isolator, slide spacer over bump stop, reinstall isolator and then the spring. You will need to do something about you shock length and the sway bar link length too.

thanks guys, thats all i needed to know!