bigadam265

My 1988 Cherokee 4.0 is have some kind of clutch issue that is above my knowledge, hopefully someone can help me out with it. It simply goes to the floor, there is no resistance and it won't disengage making it impossible to put it into gear. I've checked all the fluids and connections and haven't noticed anything out of place, it may be important to mention that it hasen't been driven for about a year but at that time everything worked fine. Anyone have some advice?

parkerbabco

bleed it

mike37

you my have gotten air in the lines as stated above bleed the line

or your master cylinder has gone bad check for fluid leaking behind the carpet by the peddle

slave cylinder my have gone bad I think that is inside the bell housing
check for brake fluid leaking out the bottom of the bell housing

parkerbabco

its on the side of the tranny..the push pin inside the slave cylinder aparently aint workin cause you dont have any pedal for the clutch.. if you bleed and you get pedal and it dont work then you got problems with the slave cylinder if you bleed it and it works everythings fine but the next day you dont have pedal. then its your master cylinder leaking somewhere

HTh3r0

bleed it. . . if thats not the problem, new master cylinder.