Clutch Issue....Please help fellow XJ owners!!!
So long story short, I was in gridlock traffic and I depress the clutch...pedal went down, but I shortly saw smoke coming under the hood from the driver side of the engine bay, closer to the firewall...the clutch pedal wouldnt come back up, and I was stuck in 2nd gear...so I pull over (lucky I had an open spot to, pop the hood and there is smoke coming from under the intake manifold... Im guessing I busted the hose somewhere but what I wish to know is
A. is my clutch totally f***ed? B. if not, how do I change the hose? C. What caused this?? Any help would be appreciated, since I use my Jeep as a daily driver to work and school |
BTW config is a 4.0L Renix with an Aisin 5 Speed...I think its an Aisin...
|
hose has fttings on each end that unscrew like a brake line easy fix
|
Originally Posted by freegdr
(Post 900264)
hose has fttings on each end that unscrew like a brake line easy fix
|
you have the Peugeot BA 10 5 speed (aka the puke alot) and i would check to see the part that was damaged before buying stuff. i have seen the slave blow before the the master line blew. so check so see which part is bad first.
|
Originally Posted by trans_am7935
(Post 900392)
you have the Peugeot BA 10 5 speed (aka the puke alot) and i would check to see the part that was damaged before buying stuff. i have seen the slave blow before the the master line blew. so check so see which part is bad first.
How can I tell? I called several auto suppliers out here (NAPA, AutoZone, Tognotti's, Pep Boys didnt even have it available at all) and they all ask if its the Aisin or Peugeot. Is there anywhere I can reference to what tranny I have? Nothing more frustrating than ordering a part, waiting 3 days to find out its the wrong one....Been there!!! |
the transmission mounts are different
|
1 Attachment(s)
heres the peugot mount not the bracket off to the side and small nuts sticking out in the front and year
|
|
i would take the old line off after you nmake sure this is the problem and look up hydralic hose in the phone book have one made same day service :thumbsup:
|
Originally Posted by trans_am7935
(Post 900392)
you have the Peugeot BA 10 5 speed (aka the puke alot) and i would check to see the part that was damaged before buying stuff. i have seen the slave blow before the the master line blew. so check so see which part is bad first.
Thanks for the help bro, without it I would've been a lost dog..lol Who's idea at Jeep/AMC was it to put a damn French tranny in an American built vehicle? Can I slap them??? |
i have never had a problem with mine its all in the abuse it get put thru
|
Originally Posted by onyx86
(Post 901706)
Who's idea at Jeep/AMC was it to put a damn French tranny in an American built vehicle? Can I slap them??? |
Originally Posted by KD3NE
(Post 901738)
They probably thought it would go well with the French fuel management and ignition system. ( RENIX ) LOL
BTW found the part I needed for CHEAP...and available tomorrow morning. BOOYAH!!! http://www.napaonline.com/Search/Det...+59999+3999999 |
All times are GMT -5. The time now is 03:02 PM. |
© 2024 MH Sub I, LLC dba Internet Brands