ztech1

Any ideas on specifics of the following?
4DR 4 WD Sport XJJL74
Vin 1J4FJ68S2CL531202
027 Front Axle Assy 194AB
028 RR Axle /Susp XMBRMOD 716AC
AHT Trailer Tow Group
DHNS Command-Trac Part Time 4WD System
ERH 4.0L I6 Power Tech Engine
The above codes are from both the master build sheet I found in the Jeep ( 1997 Cherokee Sport 4 door) and what I received back from Chrysler

Thanks and sorry for such a newbie question.

OverlandZJ

027 Front Axle Assy 194AB This is the D30 non CAD front axle assembly.

028 RR Axle /Susp XMBRMOD 716AC This i'm willing to bet is the Chrysler 8.25" rear axle assembly

AHT Trailer Tow Group Pretty self explanatory that you have the optional towing package... which is what leads me to believe you have the 8.25" rear axle.

DHNS Command-Trac Part Time 4WD System This would be the NP231 transfercase.. which does not have the fulltime feature that the NP242 would.

ERH 4.0L I6 Power Tech Engine

ztech1

So would this be a good Jeep? ie based on configuration? and Do you have any references or links so I can get more details about this power tech motor?

Thank You

TrekkerJmm

ANY XJ Cherokee is a good jeep, it all depends on what you put into it. As a starter jeep its a decent one to build with...Tj

ztech1

Thank you for the information

OverlandZJ

Try this..

http://en.wikipedia.org/wiki/AMC_Straight-6_engine

MileHiXJ

I got my build sheet from Chrysler for my XJ. Can anyone tell me what these mean?

DJHS 230MM Front Axle
DMMS 3.07 Rear Axle Ratio
DRJS 175MM Rear Axle
SCES Alcantara Wrap Steering Wheel

What axles do I have? When I look at them, it looks like a have a front Dana 30 and a rear Chrysler 8.25 or Dana 35. It's a manual, that's why the gear ratio is 3.07. And what is alcantara? My wheel right now is just hard plastic.

jmxj

wikipedia is your friend, Alcantara is composed of about 68% polyester and 32% polyurethane