lonestar27

ok my clutch just went out in my jeep. im pretty sure its slipping. i can put it in gear take my foot off the clutch and walk away. never stalls. so any way i was thinking about putting a centerforce clutch in as a replacement for the stock clutch. any info or feed back from yall on this topic would be helpfull. thanks guys this site rocks!!!!!!!

caged

i put the centerforce III clutch in my tj.

i highly recommend it.

you can get the dual friction, it's better for 4x4, but not entirely necessary.

don't forget to replace the pilot bearing and release bearing also.

96_xj

I run a Double Friction in my XJ i have put 50,000 on it and it still acts like the first day i got it.

I give it a 12 out of 10. I also replaced pilot bearing, and throw out fork. and a new slave. Also resurfaced fly wheel

trans_am7935

have been wheelin my stock cluth with a BA 10/5, 35" tires, and duel lockers. no problems here. i am doing a body swap and putting a stock replacement in that one. there is no reason to change out your clutch to aftermarket, unless u r a rock crawler, then u should have an auto anyway.