I have bought a lot of XJ spares from a local guy that wrecked 3 x '96, same year as mine, they have come in very handy

He recently offered me the last of his parts, and it was cheap, so I said yes

I cant identify these 2 parts, the larger bolt with a tapered alloy sleeve, the sleeve has a hole near the base, there is 2 of them

and the smaller tapered item which seems to be part NSS4844 or NS54844, there is thread at the top, and it has what looks like 1/4" female hex in the top of the socket to tighten it



Its possible they are for aftermarket parts he had fitted, such as diff locks and rock sliders etc

 

The one on top is for sway bar disconnects, the sway bar arm and bushing slip over the tapered end, and held in place for on road driving with a cotter pin, which is missing.

Not sure on the bottom part.

 

might that pin with threaded top, (and 1/4" hex female in the head) be a Dana 35 or similar, diff spider gear shaft retaining pin ?

 

d35 pins are the relatively the same diameter all the way across. no taper - no point. D30 uses a roll pin