jeepxjho

Well 2 days ago i installed my rough country 3" lift and the lift looks great but my axle is off center about a inch to the drivers side and i was wanting to get it back to center so i can get it aligned right.

So yesterday i decided to redrill my hole for the axle part of my trac bar to center it up, well the axle was center'd now but i kind of egged out the hole while i was drilling it and go figure i have death wobble badly.

So i put the trac bar back into the stock hole and hooray no death wobble but back to step 1 so decided to buy a new trac bar.

I have been doing some research and i want a trac bar that come with a new bracket that let me get rid of the tierod end style trac bar so i will be able to have more flex.


Rough country only show this one for lifts greater then 4" lifts which i can always add a 1" spacer if i really need it but was hoping i can use it with my lift now.

http://www.roughcountry.com/jeep_xtras_1079.html

The kit is exactly what i want but just want to see if you guys have any reviews on it or thoughts.

Abovetimberline

You have a 3" lift this one is for 4"-6". Rough country also sells an adjustable track bar for 3" lift. Rough country does make good products.

jeepxjho

i've looked around on there site but cant seem to find one for 3" only shows 4" or more lift for some reason.

Abovetimberline

I would give them a call,I have seen there track bars for 3" before,there is one on ebay that they advertise for 3"-6",part # 7571 I think,rough country advertises it as 4"-6".

XJ?2010

I have a RC trackbar its not the new double shear one. I got mine thru a local 4x4 shop but they called RC and asked for the part number for a XJ trackbar for 3" and they gave me one. I would call or do that live help thing on RC's website and they will hook you up.

mike albo

I have an adjustable one from JKS, it is up to 3.5 lift. I dont remember the part # I got it through Quadratec.

mike albo

found it part# OGS126, I paid 219.99 for it.