Camshaft Sprocket Washer Thickness?
#1
Newbie
Thread Starter
Join Date: Apr 2016
Location: Toledo, Ohio
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Camshaft Sprocket Washer Thickness?
Anyone know the Camshaft washer thickness
for older style 4.0 Pin/spring cam? (part #3 below)
I'm in the middle of Building a replacement motor for my 99' XJ, i was able to order the Camshaft Bolt, pin, and spring but it didn't come with the washer and i don't have the old one.
I have a lathe so i can turn one up if i knew the dimensions.
ill try to get one from a junkyard later today if i can find a jeep that is already partially torn down.
Thanks
for older style 4.0 Pin/spring cam? (part #3 below)
I'm in the middle of Building a replacement motor for my 99' XJ, i was able to order the Camshaft Bolt, pin, and spring but it didn't come with the washer and i don't have the old one.
I have a lathe so i can turn one up if i knew the dimensions.
ill try to get one from a junkyard later today if i can find a jeep that is already partially torn down.
Thanks
#2
Junior Member
Join Date: Mar 2012
Location: Leavenworth, KS
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L
cam sprocket washer dimensions
Trying to find the same information, need the dimensions of that washer, can't seem to find the information anywhere. Any help would be appreciated.
#3
Junior Member
Join Date: Mar 2012
Location: Leavenworth, KS
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L
Finally made it to the u-pull. For anyone that's looking, the dimensions are: Inner diameter 0.5130; Outer Diameter 2.06; Thickness 0.1830. All dimensions are in inches.
Thread
Thread Starter
Forum
Replies
Last Post
82oldskid
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
12
06-30-2021 01:45 AM
02809bristol
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
02-21-2016 06:10 AM
red4dr
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
03-05-2015 01:40 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)