caliper threads stripped
pulled my brakes off so i could change the eaxle shaft joint, go to put one of the caliper bolts in and come to find out the threads on the knuckle are stripped. i can get the bolt to tighten a little but not much. i was thinking A. longer m8x1.25 bolt to catch fresh threads. B. try a 5/16th bolt since the threads are slightly larger. C. heli coil the hole. D. replace knuckle.how hard is it to drill and tap the knuckle for the heli coil?
|
Helicoil. Easy to drill.
|
Originally Posted by jebmccall
(Post 1654472)
C. heli coil (both) holes
|
All times are GMT -5. The time now is 05:52 AM. |
© 2024 MH Sub I, LLC dba Internet Brands