c101 elim question
#1
Member
Thread Starter
Join Date: Nov 2013
Location: North San Diego County
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.0
c101 elim question
So i just did the c101 elimination but ended up with one blue/white stripe wire on the body side of the connector. There was/is no wire on the opposite side. It went into the h9 spot on the connector. Anyone know what or if there is supposed to be a wire on the engine side? Right now i just have it sitting there, but everything else went fine and connected perfect.
#2
Seasoned Member
Join Date: Sep 2013
Location: Santa Clara, CA
Posts: 280
Likes: 0
Received 1 Like
on
1 Post
Year: 1987
Model: Cherokee
Engine: 4.0
My wire diagram shows H9 is from a "wide open throttle switch" on a 2.5L. Blue with Orange tracer on the engine side, Brown with tracer on ECU side. The wire diagram is a 1987. Iono, hope that helps..
#3
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,875
Received 1,526 Likes
on
1,238 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Pretty common. No worries.
Have you driven it yet?
Did you do the splice elimination to the sensor ground wires?
Have you driven it yet?
Did you do the splice elimination to the sensor ground wires?
#4
Member
Thread Starter
Join Date: Nov 2013
Location: North San Diego County
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.0
yeah i have been driving it. It seems normal and yes I did do the splice with all 6 wires together now. thanks
Thread
Thread Starter
Forum
Replies
Last Post
Kydude7
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
7
09-20-2015 06:35 AM
codykrr
Modified XJ Cherokee Tech
9
09-18-2015 01:27 PM
mach3lude
Modified XJ Cherokee Tech
17
09-10-2015 02:34 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)