i crawled under the jeep today to look at my bumpstops and noticed one of the rubbers was missing and was wonder were i could get one other than the jy i would also like to know if i need to extend my bumpstops with 31s, trimmed fenders and stock rims

 

Are you missing the right rear one? Mine seems to fall off all the time. There are 2 available the longer one is cheaper then the shorter one from a dealership. The aftermarket ones in the length I needed were too expensive for me so I measured how much longer I needed then took some scrape box tube and plates and made mine. I ordered a new bumpstop from my job I work for a Jeep dealer.

 

I used hockey puck on the front of mine. and made spacer out of box steel for the rears.
http://www.rocklizardfabrications.co..._Bumpstops.htm
Good article for the front.

 

Daystar sells new ones that i know of

 

thanks for the input i've heard of the hockey pucks up front and was thinking of doing the spuare tube in the rear if needed

oh by the wat it was the left rear that fell off

thanks

 

It is usually the right rear because the exhaust loosens the adhesive holding it together.

 

Quadratech sells both the stock length and a 3" lifted length.

Stock is about $16 ea
Lifted in about $8 ea.

Go figure