nah i only shake at highway speeds. i know i have alignment issues but i dont mind them. when i get new tires all of it should take care of it. i more concerned about my motor..

 

Instead of the adjustable track bar you can drill a hole 3/4 over (towards driver side) and all is good. Have done this on all my XJ's.

 

Gotta drill that hole soon otherwise that bracket will be to weak. Mine was almost bored out to much because of the wobble

 

I have shocks,adj track bar,adj lower arms

 

For those of us who are using V8 springs and feel the ride is to harsh, I fabricated and installed some Mid Length LCA's, 25 3/8" C-C and it really smoothed out the ride. I'm running V8 T-bird coils w/ no isolator and it was a bit on the harsh side prior to this Mod. It is now pleasantly firm ride that matches my full S10 leaf pack perfectly

 

sub'd

 

For the xj v8 coils does it have to be the upcountry or can it be any v8 zj?

 

Up country is going to give you a little more but any v8 i think gives you lift.

 

Sweet I'm not looking for much just about an inch of lift

 

thats what she said

 

well i seached and found this does anyone have the link for it?

 

https://www.cherokeeforum.com/f51/s1...ard-pack-1380/

I just use google to search, more forums to search overall.
I typed "Bastard pack xj"
You have to try different stacks of packs to see what you want.
Good luck, have fun, wheel safe.

 

Why not just get an adjustable track bar? but if you did re drill a hole I would plate the drilled hole because the crappy stock bracket has already shown its crap by wallowing out...look at this links that shows the stress put on the re drilled bolt hole
http://www.jeepforum.com/forum/f9/br...racket-905624/

 

has anyone ever used xj leafs to make a bastard pack for an xj, just wondering

 

It has been done, but it doesn't give much lift, and it will ride rough and likely flex poorly.