Budget Builds: What Junkyard Parts Will Fit Cherokee?
#31
CF Veteran
Join Date: Jul 2009
Location: London Ontario Canada
Posts: 1,254
Likes: 0
Received 10 Likes
on
10 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
Apparently the KJ Liberty uses the 8.25 factory rear end and the 2003 up disc brakes are a straight swap onto any other 8.25. Just have to find one in the bone yard!
opps didn't see #10 when I first looked at the brakes list.
opps didn't see #10 when I first looked at the brakes list.
#36
Seasoned Member
Join Date: Oct 2008
Posts: 320
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
has any one does the thunderbird coil swap? im interested in doing this how does it ride? im assuming since they come out of a car they should ride alot nicer then then ones out of a F150 or Bronco.
#37
CF Veteran
Join Date: Jul 2009
Location: London Ontario Canada
Posts: 1,254
Likes: 0
Received 10 Likes
on
10 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
$100 for the pair!
I'm in the wrong business. Where else can you turn a $300 investment (going price for a clapped out car) into a $25,000 cash cow.
I need BAD a 8.25 3.55 rear end cause my ring is chipped. I can get it rebuilt for about $500 but the wreckers want $1000 for one. If I had the place to do it I'd buy my own wreck and sell off the parts.
Sorry Rant off!
If you find someone who's tried it let me know.
#39
Seasoned Member
Join Date: Sep 2010
Location: Camp Casey South Korea
Posts: 413
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0
I want to find the leafs off of a ZR2 S-10 because they came lifted from factory with 31s I believe. Anyone ever used these leafs? If so how much was the gain then?
#40
Member
Join Date: May 2009
Location: NW PA
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
#41
Seasoned Member
Join Date: Dec 2009
Location: NW Oregon
Posts: 381
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0 High Outout I6
the leafs from a zr2 are the same leafs as a stock s10 or s10 blazer the lift they have comes from the 3 inch hangers on the frame its like a stationary shackle on the front of the leaf springs
#42
CF Veteran
Join Date: Jul 2009
Location: London Ontario Canada
Posts: 1,254
Likes: 0
Received 10 Likes
on
10 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
For a savings of $900 I'd drive to Buffalo!
Anyone in Michigan near Port Huron got one? It's only an hours drive away from me.
I would like to keep the 29 spline. No sense in going weaker than what I already have
Anyone in Michigan near Port Huron got one? It's only an hours drive away from me.
I would like to keep the 29 spline. No sense in going weaker than what I already have
#43
Seasoned Member
Join Date: Sep 2010
Location: Camp Casey South Korea
Posts: 413
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0
#44
Seasoned Member
Thread Starter
Join Date: Jan 2010
Location: Gaines, NY
Posts: 263
Likes: 0
Received 10 Likes
on
1 Post
Year: 1996
Model: Cherokee
Engine: 4.0L HO
yea me and my brother have a '99, a '96, and 2 '91s so I know it doesnt look like they work....but if you pull out your old center console you will see that you only need to bend your e-brake lever a little bit or put a small spacer in there to move it over enough to fit the newer center console......i have a feeling that someone just did that in a build thread recently IIRC.....i havent done it yet but if i spill one more thing due to a lack of cupholders i'll have to lol
#45
Seasoned Member
Join Date: Aug 2010
Location: NYC
Posts: 296
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: I6
yea me and my brother have a '99, a '96, and 2 '91s so I know it doesnt look like they work....but if you pull out your old center console you will see that you only need to bend your e-brake lever a little bit or put a small spacer in there to move it over enough to fit the newer center console......i have a feeling that someone just did that in a build thread recently IIRC.....i havent done it yet but if i spill one more thing due to a lack of cupholders i'll have to lol