Bolt size question...
#1
::CF Administrator::
Thread Starter
Join Date: May 2008
Location: Okc area
Posts: 10,039
Likes: 0
Received 15 Likes
on
11 Posts
Year: 1991
Model: Cherokee
Engine: 4.0 I6
Bolt size question...
Anyone happen to know what the bold side is for the bolts that hold the control arms to the axle are? Also the upper CA frame bolts do you have to use the stock style or can you use the same ones you use to bolt the CA's at the axle end?
#2
Senior Member
Join Date: Jul 2008
Location: West Virginia
Posts: 709
Likes: 0
Received 0 Likes
on
0 Posts
Year: 98
Model: Cherokee
Engine: 4.0L
Lower control arm bolts are 14x2.0x110 only place I found them was dealership don't know the size for the upper arms they are different than lowers.
#3
Senior Member
Join Date: Apr 2009
Posts: 501
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L I-6
They're not grade rated but I bet they would do the trick, 100,000 psi tensile strength.
EDIT: I can't get the link to work but its McMaster Part Number: 91287A806 http://www.mcmaster.com/
Last edited by Schmoozer; 05-02-2009 at 09:31 PM.
Thread
Thread Starter
Forum
Replies
Last Post
JayneCobb
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
26
08-11-2020 03:22 PM
Broke 'N Tow
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
09-16-2015 07:27 PM
EZRider
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
09-14-2015 11:45 AM
BluJay
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
09-09-2015 05:05 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)